Bathroom Exhaust Fan Installation Sydney

Clear the Steam, Stop the Mould

Need bathroom exhaust fan installation in Sydney? We install and replace exhaust fans in homes across Mosman, the North Shore, and the Northern Beaches, ducted to outside air so the steam actually leaves your home. Fan only, fan and light, or a 3-in-1 heater unit- we'll fit one that suits the room. Residential work only, by a licensed electrician (Contractor Licence 497337C), with a fixed price before we start.

50+

5-Star Google Reviews

5,000+

Electrical jobs completed

15+

Years Experience

27

Suburbs Served

Signs Your Bathroom Fan Isn't working

A bathroom fan can run every day and still not clear the steam. Here's how to tell.

A mirror that's still fogged

If the mirror is still fogged long after you've dried off, the fan isn't moving enough air, or the air has nowhere to go.

Mould on the ceiling or in the grout

Black spots on the ceiling above the shower, or grout that keeps going dark, mean moisture is sitting in the room. Cleaning it off treats the mould, not the cause.

A fan that's loud but weak

Hold a sheet of toilet paper up to the fan while it runs. If the fan can't hold it in place, it isn't pulling much air. A worn motor, a blocked duct or a duct that's come apart in the roof are the usual reasons.

Where Does Your Fan Actually Vent?

A fan that vents into the roof just moves the mould upstairs. The steam settles on the roof timbers and insulation, and the damp stays in your home.

That's why the building code says that, for new work, a bathroom exhaust fan must discharge to outdoor air, directly or through a duct. A duct can get outside in three ways:

  • Through the roof, with a cowl to keep the rain out.
  • Through the eave, with a vent in the soffit.
  • Through the wall, where the bathroom is on an outside wall.

If your current fan blows into the roof space, we can usually extend the duct to outside without replacing the fan. We'll check when we quote.

Insulated exhaust fan duct running through the roof space to an external eave vent.

What Bathroom Exhaust Fan Installation in Sydney Should Include

Whoever does the job, a proper install should tick these boxes.

  • Ducted to outside air, not into the roof space or a wall cavity.
  • At least 25 litres per second of airflow. That's the code minimum for a bathroom. Larger bathrooms need more.
  • A 10-minute run-on timer, linked to the light, if the bathroom doesn't have enough window opening. The fan keeps clearing the steam after you leave.
  • A way for air to get in, like a gap under the door. If the fan can't get air in, it can't push air out.
  • The fan above or near the shower, where the steam is.
  • Wired by a licensed electrician, with a Certificate of Compliance for Electrical Work (CCEW) when the job is done.

Types of Bathroom Exhaust Fans We Install

Exhaust fan only

A ceiling or wall fan on its own switch, or linked to the light. The simplest choice for most bathrooms.

Exhaust fan with a light

One fitting in the ceiling that clears the steam and lights the room. Good for a bathroom with one central light point.

3-in-1 heat, light, and fan

Heat lamps, a light and an exhaust fan in one unit. Warm in winter, but the heaters draw more power, so we check the circuit can take it.

What You’ll Notice After a Bathroom Fan Is Installed

  • Mirrors clear faster after showers.
  • Better ventilation helps stop recurring mould.
  • A quieter fan replaces rattling, distracting noise.
  • Heat, light, and fan can run from one switch.
  • You receive a Certificate of Compliance for the work.

Book Exhaust Fan Installation Sydney

Still dealing with steam, mould, or a noisy fan? Book an on-site visit and get the ventilation sorted properly.

FAQs

Frequently Asked Questions

Does the fan have to vent outside?

Yes, for new work. The National Construction Code requires exhaust air to discharge outdoors. Venting damp bathroom air into the roof space can lead to condensation, moisture damage, and mould.

 Can you replace my old fan without new ducting?

Often, yes. A straight swap can work when the existing duct already runs outside and is in sound condition. If it vents into the roof, we’ll explain the available options.

 I'm in a strata apartment. Is that a problem?

Usually not for a like-for-like replacement. A new opening through an external wall or common roof may require strata approval, and we’ll tell you before starting.

Can you install a 3-in-1 heat, light, and fan unit?

Yes. The heat lamps draw more power than a fan alone, so we check your circuit can take it before we install.

Which areas do you cover for exhaust fans?

We're based in Mosman and work across the North Shore and the Northern Beaches. That includes Cremorne, Neutral Bay, Lane Cove, Chatswood and the coast from Manly to Dee Why.